Cleaning chemical for industrial oil and grease with OG-Cleaner 100

OG-Cleaner100 is the leading safe and effective cleaning chemical for industrial oil and grease today, trusted by many customers. Not only completely removing grease stains quickly, the OG-Cleaner100 is also highly regarded for its safety, does not make corrosive to metal surface or damage equipment.

Before going to understand deeper about cleaning chemical for oil and grease, we will find out why it is necessary to clean industrial grease on equipment!

However, after a period of using, the grease and oil oxidizes, reduces its original performance and must be replaced. Oil and grease, if not replaced in time, not only causes unsightly but also forms very “clammy to hard” plaques, affecting operability, and even damaging equipment.

Please take a look some pictures of grease and oil on the device below.

However, after a period of using, the grease and oil oxidizes, reduces its original performance and must be replaced. Oil and grease, if not replaced in time, not only causes unsightly but also forms very “clammy to hard” plaques, affecting operability, and even damaging equipment.

Please take a look some pictures of grease and oil on the device below.

OG is abbreviation of Oil Grease; OG-Cleaner 100 is a cleaning agent for grease and oil inside and outside of the heat exchanger, machine and other equipment

2.1 Advantages

Here are the outstanding advantages of cleaning chemicals OG-Cleaner100 for industrial grease and oil

• Clean grease stains from soft to thick, dry – hard layer.
• Easily biodegradable, soluble in water, so it is convenient for dilution.
• Does not contain chlorinated solvents and hydrocarbons.
• Suitable for all metals, rubber, plastic and painted surfaces.

Contains anti-corrosion agents, so it is safe for soft metals such as aluminum and copper.

2.2 Using effectively

To clean industrial grease and oil with chemical OG-Cleaner100 for the best effect, before start using, should need to pay attention to the concentration to clean and how to do it. As follows:

– Dilute concentration: Depending on the layer of grease or oil residue, it can be mixed at a rate of 10% – 30% with water.

– How to do: Keeping the diluted solution contacting with cleaning object for 5 – 15 minutes (depending on the actual condition to adjust). Depending on the shape of the equipment to be cleaned, there are suitable ways such as:

• Soak and clean.
• Soak and spray again with water.
• Mix with water to pressurize flat surfaces.
• Use a circulation pressured pump to clean the heat exchanger: This is the most difficult type of cleaning because the dirty layer is very thick, hard to see in the narrow corners with the naked eye. Therefore, it is necessary to carefully evaluate the actual situation and prepare enough chemicals to bring high efficiency. Cycle 1-5 hours and can repeat if too dirty.
• Can be combined with other methods such as heating, high pressure spray…

UCE Co., Ltd is supplying prestigious industrial grease cleaning and service package today. We are committed to provide quick results, without damaging the equipment by using specialized chemicals and performed by a experienced team

In addition, over the years, our company has always been trusted by customers for the following reasons:

• This is our deep expertise.
• Experience in performing more than 300 equipment cleaning projects, including industrial grease and oil cleaning.
• Laboratory to support analysis, engineers to survey actual assessment and provide detailed instructions for customers. Therefore, project quality is always guaranteed.
• Provide a full service package with chemical.
• Meet industrial grease cleaning needs anytime, anywhere.
• Samples can be provided for testing.
• ….

UCE Co, Ltd is committed to being the best choice for customers when there is a need to clean industrial grease scale. Please contact us for useful information and success in your upcoming project!