UNITED CHEMICAL & ENVIRONMENT TECHNOLOGY CO., LTD


Main Office – VP Chính: 215 Nguyen Van Dau St, Ward 11, Binh Thanh, HCMC. Tel: (028) 3550 1200 – Fax: (028) 3550 1201

Branch – Chi Nhánh: 200/1/16 Binh Loi, Ward 13, Binh Thanh, HCMC. Skype: chemical.environment.tech

Contact (Zalo, WeChat): 0918.676.245 ky@uce.com.vn   (Zalo): 0937.626.245 sales@uce.com.vn

연화제의 수지 재생 계산

Above calculation is reference only due to it is depended on many factors such as auto valve, inlet hardness and quality, life of resin, regeneration…. Contact us to receive the help. If need to optimize the working, to know the trouble or save the cost… you can fill some key information as below then send to us for the advice

*** FREE EBT & TECHNICAL GUIDE ***

In fact the color result is not clear because many factors that affect to, so will not know clearly the hardness passed or not passed. But Rapid EBT testing is essential to optimize the use of the softener – Less regeneration, hardness deposit problem, higher chemical consumption – More regeneration increases operating cost. Contact us for FREE of EBT Reagent and TECHNICAL INSTRUCTION for this

                                                                                                                                                                                                                                                   
I SALT ( NaCl )  FOR 1 TIME REGENERATION
1 If know capacity of Softener
Flow rate / tower m3/ h
Dry NaCl kg / time 0
Water to dilute Lít / time 0
2 If know Resin of Softener
Resin volume Lít nhựa
 Dry NaCl kg / lần 0
Water to dilute Lít / lần 0
II OPTIMIZE AND COST SAVING
II.1 Data From Original Design
1 Cycle of service hr
2 Designed flow m3/h
3 Total soft water per cycl m3 0.0
4 Diameter of tower mm
5 Resin volume  / tower Lit
6 Overall height mm
II.2 Existing Regeneration
1 End point of regeneration completed
2 Real NaCl used / time kg
II.3 Existing Operatio
1.1 Sampling time
1.2 Interval ( Regenerated - Sample ) hr 00 h 00 mm
2 Total soft water of this cycle to up sampling m3
3 Real flow rate at sampling at flow meter m3/h
4 Fe total ppm Fe
5.1 Hardness before Softener ( ppm CaCO3) Min
Max
5.2 Hardness after Softener ppm CaCO3
6.1 TDS before Softener ( ppm ) Min
Max
6.2 TDS after Softener ppm
II.4 Other Information
Purpose of Softener
Hardness target after Softener ppm CaCO3
Original water source (Well, River…) ppm CaCO3
If any steps of treatment before Softener
If any steps of treatment after Softener
III CONTACT INFORMATION
Full name & Position
Company
Mail
Mobile
Other inquiry